ServicesGutters
Gutters in Avon, Indiana
We install continuous aluminum gutters and downspouts sized to the roof above them. Gutters that work keep water off your fascia and away from your foundation. We check the full roof edge first, so you know whether a repair or a new system costs less over the years.

Gutters are the last part of your roof
Every time it rains, your roof sheds water onto the eaves. The gutter's work is to collect it and carry it off away from your home. If it fails, water runs behind the trough, rots the fascia, streaks the wall and settles along the foundation.
Because we are roofers, we see gutters as the final few inches of the roof. Before we price anything, we look over the drip edge, the fascia and the shingles along the eaves. Hanging new gutters on rotten wood is money thrown away.
Bargain gutters save money the day they go up. Troughs that are too small, spikes that pull out and joints that drip after a couple of winters cost you later. We've been in business for 14 years, and the gutter jobs that last are the ones sized right from the start. We lay out the price now and the upkeep later, and the choice is yours.

What we do on a gutter job
- 01
Continuous aluminum runs
We form each gutter at your home from a coil and cut it to the length of the run. With no splice in the middle, there are fewer spots to leak. Joints land only at corners, and we seal every one.
- 02
Sized to the roof above
Five-inch K-style gutters suit most homes. Steep pitches, large roof planes or valleys that funnel water into one corner often call for 6-inch gutters and 3x4 downspouts. We measure and explain which fits your roof.
- 03
Hidden hangers screwed in
We use hidden hangers driven into the fascia with screws, set close together so they carry snow and ice. Spikes back out as the wood swells and dries. Screws stay put.
- 04
Downspouts placed to drain
We set downspouts where the ground can handle the water, slope each run toward them and add extensions so the water lands well away from your foundation.
- 05
Fascia and drip edge
Any soft wood behind the gutter line gets replaced before we hang new metal. We also check that the bottom lip of the drip edge hangs inside the back of the trough. That way roof runoff drops into the gutter instead of soaking the board behind it.
- 06
Repairs that make sense
Plenty of gutters don't need replacing. When the system is sound, we reseal leaky corners, rehang low runs, fix the slope and replace dented pieces.
Questions about Gutters?
Call(317) 836-2367When your gutters are telling you something
Overflow in ordinary rain
Water pouring over the front edge in a normal shower means the gutter is clogged, sloped wrong or too small for the roof it serves.
Sagging or a gap at the fascia
When the gutter pulls away from the board, the spikes have usually failed or the wood has rotted. An Indiana winter's snow and ice can tear a weak hanger loose quickly.
Leaks at corners and joints
Sealant ages, hardens and splits. A corner that drips in every storm keeps soaking the same spot of soil.
Stains or peeling paint at the eaves
Water slipping behind the gutter leaves dark streaks, flaking paint or spongy spots on the fascia.
Damp basement or eroded beds
Standing water, washed-out mulch or a wet basement after a storm often come from downspouts emptying right beside the house.
Thick icicles along the edge
Big icicles hanging from the gutters can mean the troughs are clogged, and sometimes that an ice dam has formed on the roof. We look at both.
How we handle your gutter job
- 1
Free roof inspection
You call, and we set up a free roof inspection. We walk the eaves, measure every run and check the fascia, drip edge and downspout spots. Then you get a written estimate that breaks out each part of the job.
- 2
Taking down the old system
On the day of the job we remove the old gutters and haul them off. With the fascia exposed, we look it over again and send you photos of any rot before we repair it.
- 3
Hanging the new gutters
We form continuous runs right at your home, slope them toward each downspout and secure them with hidden hangers. Most houses are finished in one day.
- 4
Flow test and cleanup
We run a hose through the system and watch every corner and outlet drain. After that we gather the scraps, screws and empty sealant tubes so your yard is left as we found it.
What sets the price of a gutter job
Most gutter work is figured by the linear foot. That number alone won't tell you the total. Gutter size, eave height and how many turns your roof makes all add to it. Every part shows up as its own line on your estimate, and financing is an option if you'd rather pay over time.
- Footage and corners
- Longer runs take more aluminum. Every inside or outside corner is another joint we have to form and seal, so a roof with many turns costs more than a plain box.
- Trough and downspout size
- Six-inch gutters and 3x4 downspouts cost more to buy than standard sizes. On a large or steep roof they often cost less over the years, since they don't overflow and soak the fascia.
- Eave height and access
- Second-story eaves, steep pitches and cramped spots over decks or garden beds need more ladder work and more care.
- What the fascia looks like
- Soft or rotted boards get replaced before anything new goes up. Some of that damage hides behind the old gutters, so we photograph it and price it with you before we fix it.
- Guards and add-ons
- Gutter guards raise the cost now and cut down on cleaning later. On a lot full of big trees they usually earn their keep. On an open lot they may not, and we'll tell you that.
Common gutter questions
Do my gutters need to be replaced along with a new roof?
Not if they are still solid. If they sag, leak or are too small, swapping them during a roof replacement means one setup instead of two, and we can tie the new drip edge straight into them. We'll give you our honest read on your home.
Why pick continuous gutters over sectional ones?
Sectional gutters are pieced together about every ten feet, and each of those joints can start leaking down the road. Continuous gutters are formed in one length per run, so the only joints are at corners. That means less resealing and less upkeep as the years go by.
How often do gutters need cleaning?
Twice a year works for most homes, once in late spring and again after the fall leaves come down. Trees right over the roof can mean more trips up the ladder. Gutters packed with debris hold water and ice, and that weight wears out hangers and fascia.
Is repair an option instead of new gutters?
A lot of the time, yes. Resealing a corner, rehanging one low run or correcting the slope costs much less than a full replacement. If the metal is thin, dented all over or too small for the roof, we'll say plainly that repairs won't pay off.
What kind of warranty comes with gutter work?
Our installs carry a 2-year labor warranty, upgradable to 10 years through Owens Corning. We'll go over how the upgrade works when we walk through your estimate.
How do you decide where downspouts go?
We study the slope of your yard and look for spots where water can drain off without pooling at the foundation or running across a sidewalk. You'll see our suggested spots before we install anything.

Have your gutters checked with the roof
Give us a call and we'll set a time for a free roof inspection. We'll look at the gutters, fascia and roof edge and tell you straight whether to repair or replace.